- Wi-Fi 6 Mesh Wi-Fi – Next-gen Wi-Fi 6 AX3000 whole home mesh system to eliminate weak Wi-Fi for good(2×2/HE160 2402 Mbps plus 2×2 574 Mbps)
- Whole Home WiFi Coverage – Covers up to 6500 square feet with seamless high-performance Wi-Fi 6 and eliminate dead zones and buffering. Better than traditional WiFi booster and Range Extenders
- Connect More Devices – Deco X55(3-pack) is strong enough to connect up to 150 devices with strong and reliable Wi-Fi
- More Gigabit Ports – Each Deco X55 has 3 Gigabit Ethernet ports(9 in total for a 3-pack) and supports Wired Ethernet Backhaul for better speeds. Any of them can work as a Wi-Fi Router
- AI-Driven Mesh – Intelligently learns the network environment to provide ideal WiFi unique to your home
- Easy Setup and Management – The Deco app helps you set up your network in minutes with clear visual guidance and keeps you in control even when you are not home; Works with Alexa as well Turn on or off Guest Wi-Fi by simple voice commands
- TP-Link HomeShield – TP-Link’s premium security service keeps your home network safe with cutting-edge network and IoT protection. Free features: 1. Basic Network Security including Security Scan and IoT Device Identification 2. Basic Parental Controls 3. Quality of Service 4. Basic Weekly/Monthly Reports. Visit TP-Link website for more information.
- Works with all internet service providers, such as Comcast, Charter, AT&T, Verizon, Xfinity, Spectrum, RCN, Cox, CenturyLink, Frontier, etc.( a modem is required for most internet service providers)
- WiFi Transmission Power: CE:
TP-Link Deco AX3000 WiFi 6 Mesh System(Deco X55) – Covers up to 6500 Sq.Ft. , Replaces Wireless Router and Extender, 3 Gigabit ports per unit,…
$169.98
Category: Computers & Accessories
Product Dimensions | 4.33 x 4.33 x 4.49 inches |
---|---|
Item Weight | 3.3 pounds |
Item model number | Deco X55 |
Date First Available | January 31, 2022 |
Manufacturer | TP-Link |
Country of Origin | Vietnam |
10 reviews for TP-Link Deco AX3000 WiFi 6 Mesh System(Deco X55) – Covers up to 6500 Sq.Ft. , Replaces Wireless Router and Extender, 3 Gigabit ports per unit,…
Add a review Cancel reply
Related products
Computers & Accessories
Rated 4.63 out of 5
$6.99
Computers & Accessories
Dell 65W USB-C Laptop Charger for XPS and Latitude 5000 – Power Cord Included
Rated 4.92 out of 5
$20.05
Computers & Accessories
Rated 5.00 out of 5
$86.00
Computers & Accessories
Rated 4.88 out of 5
$19.99
Computers & Accessories
Amazon eero 6 dual-band mesh Wi-Fi 6 extender – expands existing eero network
Rated 4.88 out of 5
$13.99
Computers & Accessories
Rated 5.00 out of 5
$74.99
Computers & Accessories
Rated 5.00 out of 5
$31.49
Computers & Accessories
Rated 4.89 out of 5
$19.99
JLJ –
I’ve been trying to get better wifi coverage in our 1550 square foot 2-story farmhouse, as well as around our 1-acre yard and the guest house we have about 30 feet away from our main home.
These work wonderfully! So much more reliable and convenient than a regular extender that creates its own separate networks.
This system is truly plug-and-play. Only a couple minutes to set each unit up, and most of that is the boot-up time. Speed and signal strength are excellent, even all the way across our yard in the garage and, most importantly, in our guest house. Even having all three units talking to each other in a long chain (so that each is handing off the signal to the next, rather than having them all overlap) results in fast speeds at the end of the chain.
Very pleased – highly recommended!
One thing to be aware of when setting up – after updating firmware, or powering a unit off then on again, it can sometimes flash red for about a minute after booting up. Just wait a minute or two, and (unless there’s some other issue) the light should go green. I think it just takes a moment for them to communicate.
David Segura Dessavre –
كأول تجربة لي في شراء موزعات الشبكه وطحت على النوع هذا والحمدلله التجربه من اروع ما يكون سهوله في التنصيب والتوزيع والسرعه واصله الي اقصى زاويه بالمنزل من افضل ما يكون مع العمل لكل من يريد ان يشتري الموزعات هذي لا تعتقد انك راح تاخذ نفس السرعه من المودم الي اخر جهاز ولكن ولله الحمد السرعه عندي مابين ٣٠٠ ميقا الي ٦٠٠ فايف جي واستطعت الحصول النصف واعلى في كافة المنزل مع تغطيه ممتازه يستحق كل ريال فيه حقيقه
Michael S. –
Went from a modem, a router, and 2 extenders to the Decco Mesh and, I’m so happy I did. Before, keeping up with connections to my various devices was a daily chore of restarting at least one device, or the router, or an extender, or both, or everything. The simplicity of the setup, the power of the signal, and the stable connections, make the Decco Mesh system worth every penny. Everything I have works nearly flawless. I say nearly because no matter the quality of the equipment, when it comes to anything Internet, something will hiccup sooner or later. But I’m happy to say those occurrences are rare now. I can confidently recommend this.
Sebastián Valadez –
El Deco X55 funciono muy bien, tengo una red con Deco M4, el Deco M4 principal me empezo a dar problemas por sobrecarga de trabajo tengo 500MB de internet, compre este Deco X55 para hacerlo el principal y se integro muy bien a la red y soluciono los problemas, tengo camaras ip, imacs, pcs y los celulares, ahora todo funciona como debe….
James R. –
Thanks to Prime Day it was time for me to finally upgrade my home network. I was looking for a reasonably priced WiFi-6 mesh system with 3 stations (1 main + 2 satellites), at least AX3000 speeds, and a price tag of up to $300. It came down to two choices: the Eero 6+ and what I chose instead, the TP-Link Deco X55. Both systems had similar specs, but I liked how the TP-Link Deco had 3x Gigabit ethernet ports per satellite (the Eeeros have just 2). That meant I could wire each satellite in a daisy-chain configuration for a wired backhaul AND connect the 3rd ethernet plug to the gigabit switches I had at each satellite location. This meant that all of my hard-wired devices could stay hardwired, while adding mesh WiFi at full speeds (no bandwidth reserved for transmission thanks to the backhaul).
Installation was quick and easy – I simply turned off my cable modem, disconnected my previous router, installed one of the Deco X55’s in its place (in my bedroom), and turned everything back on. After downloading the TP-Link Deco app I had an internet connection set up and good to go in less than 5 minutes! Once that was working, I added the other two Deco’s into the mix – one in the living room and one in the family room – with all three forming an almost perfect triangle for whole-home coverage. In less than 15 minutes after opening the box, I had a fast, Wifi-6 mesh system in my home.
I had been using an older AC1900 router for almost 10 years now and back then it was just fine – but with more and more smart home devices being added to my home, it no longer was enough. I have a medium-sized amount of smart home devices (around 50 devices including hubs) and on occasion, I’d experience signal dropouts on some of the farther cameras, and other devices would sporadically go offline/online at random. With the X55 mesh installed, all of my issues disappeared! My smart cameras used to show a signal strength of between 80% (indoor cameras) down to around 55% (outdoor cameras). With the TP-Link Deco mesh in place, the signal strength changed to 100% indoor and 95% outdoor – a major improvement for sure. Pulling up live and recorded footage from the outdoor camera is so much quicker now. All of the other indoor smart devices I have all show 98-100% signal strength. Needless to say, this was a definite upgrade!
As for my rating, I give it a solid 4-stars. There are a few small details that keep me from giving it a full 5-stars: some missing features that I had with my old router. One of them is being able to bulk reserve IPs by entering them into the app beforehand; with the TP-Link Deco, the device has to be connected to the network FIRST (with whatever DHCP IP address the Deco gives it), then you have to go into the app to reserve it with a static IP. I would rather have the more common table where you just enter each Mac address, static IP, and device name and it’s done. Another missing feature is being able to have at least 2 separate SSIDs (not including a guest SSID). With the Deco you can only have one main SSID and one isolated guest SSID.
Finally, to see some speed numbers I ran speed tests using both fast.com and speedtest.com, and the day before installing the mesh system I had an average internet speed of around ~260Mbps. The day after I installed the TP-Link mesh system my speeds went up to well over 490Mbps! Downloading is a lot faster, and streaming is super snappy as well.
So in the end, I am very happy with my purchase of the TP-Link Deco X55 Wifi6 mesh system. Aside from the small feature complaints above, everything is awesome! I no longer have devices going offline/online. My internet speed has almost doubled (my old router was the bottleneck!) and streaming seems quicker as well. If you are looking for a mesh system to upgrade your current home network to the current WiFi6 standards, I would say that this is definitely a good buy!
————
EDIT 02.18.2024: TP-Link Improvements Are Awesome!
TP-Link has been steadily pushing out Deco firmware and app updates, and my -1 star complaint no longer exists thanks to two added features that completely address my complaints:
– CUSTOM IP RESERVATIONS
First, I don’t have to play the game of connecting a new device, letting the Deco assign a DHCP address to it, then having to go back into the app to manually change the reserved IP. Now I can go straight into the Deco app and under the “Address Reservation” tab I can now select “Custom”; this brings me to a page where I can manually type in a MAC address AND the local IP address that I want to assign to it – without having to connect the device first.
– SEPARATE IoT NETWORK
My other complaint was that I only had the option to have two SSIDs – one main and one guest network. I wanted to be able to configure another SSID specifically so I could group all of my Smarthome devices, and after a couple of firmware updates later TP-Link not only gave me that option, but an even better one: they added a dedicated Iot (Internt of Things) network! Not only does this group my sparthome devices separate from my main network, but it also restricts communications between networks so that the IoT devices stay isolated. This is exactly the feature I wanted them to add during my initial review.
– VPN COMPATIBILITY
TP-Link has also added the option to use a VPN (server or client) directly through the router, as opposed to having to VPN each individual device manually. Furthermore, the VPN can be assigned to the network in two ways: either all devices (every device connected to the mesh will go through the VPN) or I can select specific MAC addresses that must pass through the VPN before reaching the Internet (tI chose option #2). With this I can make sure that certain devices that like to “call home” can only do so through the VPN, helping to protect my network and privacy.
All in all, TP-Link has done a great job at supporting these devices, and their ability to add additional features over time have made me feel confident to revise my initial review now give this system a worthy 5 stars!
Sebastián Valadez –
Deco siempre confiable en cuanto a sistemas Mesh. Recomendado al 100%, únicamente sería tener una conexión bastante rápida para sacar buen provecho del Wi-fi 6 pero corrigió los problemas que tenía de zonas muertas en algunos lugares de mi hogar. Los puertos Gigabit también de igual manera se agradecen por si quieren conectar alguna consola de videojuegos o su televisión. Algo también que agregar es que su aplicación es muy sencilla de utilizar y bastante completa. En pocas palabras, lo tiene todo y por el precio es que me parece una muy buena inversión c:
Erik –
Super bien vale la pena lo recomiendo y rápido envio
Janelle –
Despite what the Starlink app says about 3rd party mesh networks, you CAN continue to use your Starlink Gen 3 router as your main router (without bypass needed) and use this Deco mesh network to extend your wifi signal. Very easy set up: hardwire 1 of the Deco to the 1 of the ethernet ports on Starlink Gen 3 router, power on and follow set up instructions on app. I then easily linked 2 more Deco around the house and our wifi was instantly stronger and we are now able to stream movies on the tv at the far end of the living room. I am also still using the other ethernet port on the router for my computer without diminished speed.
The other possible option was to purchase a second Starlink Gen 3 router to act as a mesh to the first for $250, so about the same price as the Deco, but I was hesitant to get another one because the main one has a relatively low range compared to other routers I have used in the same location on my previous network.
I hope this saves someone all the time I lost searching for this information!
Arturo Alcantara Castro –
TP-Link es sinónimo de calidad, y los DECO no se quedan atrás, realmente funcionan muy bien. La instalación es fácil, sin embargo, si te llevará un tiempo, y más aún si ya tienes dispositivos inteligentes en tu wifi actual, tendrás que reconfigurarlos todos. Fuera de ello, los DECO funcionan muy bien, tienen muy buena cobertura. En mi casa es de 2 plantas, 3 habitaciones, el modem del ISP está en la planta baja en la sala, por lo que a mi oficina (donde normalmente trabajo) no llegaba la señal 5Ghz y la velocidad en 2.4Ghz bajaba considerablemente. Tengo contratado 200Mbps y a mi oficina llegaban entre 20 y 50 Mbps, siendo que la distancia lineal no es mucha (10-15mts tal vez), al instalar el juego de 3 DECOs la historia cambió, ahora puedo conectar por cable mi laptop desde el DECO que puse en mi oficina, de esta forma obtengo aún mejor velocidad, ahora tengo entre 170-200Mbps y el rango de alcancé mejoró por mucho, y por tanto también ayudó mucho a la señal para las cámaras que tengo en el exterior de la casa.
Si bien es un producto nada barato, vale la pena, más aún si tu trabajo o tu día a día depende en mayor medida del internet. Si la velocidad, estabilidad y consistencia del internet no es tu prioridad, o bien el tamaño de tu casa no es muy grande, tal vez no lo necesites.
K. Renee –
I rarely write product reviews, but the TP-Link AX3000 (Deco X55 Pro) mesh system has been so impressive that I felt compelled to recommend it. It’s not only simple and stylish, seamlessly blending into my home decor, but its performance is outstanding.
No modem is needed; I directly connected my fiber, and everything worked perfectly right out of the gate. The setup process was incredibly straightforward, thanks to the intuitive app, and it effectively eliminated all dead zones in my house. Now, my entire home enjoys fast, seamless Wi-Fi coverage.
The updates are easily managed through the app, and the extender’s status is clearly indicated by a very simple yet effective color light system—no guessing required. Given its sleek design, ease of use, and excellent performance, I highly recommend the TP-Link AX3000 (Deco X55 Pro) to anyone looking to upgrade their Wi-Fi system!